Baseline-systems BaseStation 1000 Manual de usuario descargar pdf (Pagina 95)

BaseStation 1000 Irrigation Controller Manual

9 – Status Reports & Messages

The main screen shows information about the operating state of the BaseStation 1000 controller.

The controller provides the following categories of reports and each category can have multiple

reports.

• Zone Status

• Program Status

• Flow and Master Valve/Pump Status

• Running Zones

• Operator Messages

• Rain Delay

• Event Days

• System Status

Viewing the Zone Status Report

1. When the controller is in the Run menu, the Zone Status report typically displays on the

screen. If you do not see “ZONE STATUS” and

the list of zones, press the RUN button to

make sure that the controller is in the Run

menu, and then press the BACK button to

display the Status Report menu.

2. The Zone Status option should be

highlighted. If it is not, press the





button to highlight it, and then press the OK

button. The Zone Status screen displays.

3. To return to the Status Report menu, press the BACK button.

Understanding Zone Statuses

The following icons identify the status of the zones:

Icon

Status

Description

Unassigned

The zone does not have a biCoder assigned to it

Idle (Done)

The complete cycle has finished for this zone – including watering

and soaking

Page 89

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 121 122

Sin comentarios

Baseline-systems BaseStation 1000 Manual de usuario Pagina 95